Key benefits

  • Over 25,000 products
  • In-house branding
  • Your own account team
  • Own van deliveries
Scott Arnot, Product Marketing Manager Published 15th Nov, 2026 Updated 16th Nov, 2026

EN 511:2006 STANDARD: COLD PROTECTION GLOVES EXPLAINED

Does your team work in cold conditions? Whether they work outdoors in the winter or they’re involved in freezer work, cold-protection gloves are an important item of PPE.

But not all gloves provide the same level of protection.

Here, we’ll walk you through the EN 511:2006 safety standard, which sets requirements and test methods for gloves designed to protect against cold.

Plus, we’ll share our top tips for choosing the right cold store, freezer, or winter work gloves.

WHAT ARE COLD PROTECTION GLOVES?

Cold protection gloves are specialist work gloves designed for use in cold conditions.

They include:

  • Cold store gloves
  • Freezer work gloves
  • Work gloves for winter

These gloves use thermal insulation to help retain body heat and maintain warmth. Some also offer water resistance to help protect against snow, ice, or damp conditions.

Meanwhile, textured coatings can help workers grip tools and materials in wet or icy conditions.

You can browse our range of thermal and cold-protection gloves at the SMI shop.

Cold protective gloves are evaluated under the EN 511:2006 Standard.

WHAT IS THE EN 511:2006 STANDARD?

EN 511:2006 is the European standard for protective gloves designed to protect against cold hazards down to -50°C.

It covers two types of cold:

  • Contact cold - cold that occurs when touching cold objects or surfaces
  • Convective cold - cold caused by low temperature, including cold air and wind

EN 511:2006 also includes a test for resistance to water penetration.

Importantly, not all gloves that are certified offer the same level of protection in cold conditions. Rather, the standard measures how well gloves perform against each type of cold.

Understanding EN 511:2006 ratings is therefore important when choosing the best cold protection gloves for your workforce.

FORTDRESS POWER GRIP FREEZER GLOVES

EN 511:2006 GLOVE RATINGS

Certification involves a series of tests. These evaluate a glove’s thermal insulation against convective cold, contact cold, and water permeability.

Gloves then get assigned a performance level for each category.

CONVECTIVE COLD RESISTANCE RATING

Cold protection gloves undergo a convective cold test. This tests their thermal insulation against convective cold, such as air and wind.

Convective cold resistance is rated from 0 to 4.

Gloves that achieve Level 4 provide the highest performance level for insulation against convective cold.

CONTACT COLD RESISTANCE RATING

Cold protection gloves also undergo a contact cold test. This measures how well they insulate against cold when directly touching cold objects.

Contact cold resistance is also evaluated on a scale from 0 to 4.

Gloves that achieve a Level 4 provide the highest performance level for direct contact with cold materials.

WATER PERMEABILITY RATING

Lastly, EN 511:2006 includes a test for resistance to water penetration.

Gloves can be rated 0 or 1. A score of 1 indicates no water penetration during the test. A score of 0 means water penetrated the glove.

UNDERSTANDING COLD PROTECTION GLOVE RATINGS

Want to understand how much protection work gloves offer against the cold?

You’ll need to check:

  1. Whether they’re EN 511:2006 certified
  2. What resistance rating they received

Here’s the symbol to look for:

EN 511 Symbol Meaning

If gloves display this symbol, you know they’ve been tested to EN 511:2006.

Alongside the symbol, you should see a three-digit code. Here’s how to decode what it means:

  • The first digit shows how the glove scored for convective cold resistance
  • The second digit shows how the glove scored for contact cold resistance
  • The third digit shows how the glove scored for water permeability resistance

Is there an X in any of these positions within the code? This means that the corresponding test wasn’t carried out.

AN EXAMPLE OF EN 511:2006

Let’s say your glove label says 120.

Here’s what it means:

HAZARD

RESISTANCE RATING

WHAT IT MEANS

Convective cold

1

Performance Level 1

Contact cold

2

Performance Level 2

Water permeability

0

Water penetrated during the test

WHAT LEVEL OF PROTECTION DO YOU NEED FROM THERMAL GLOVES?

When it comes to thermal and cold protection gloves, more protection isn’t necessarily better.

Instead, the goal should be to choose gloves that provide the right level of protection without unnecessarily impacting comfort or dexterity.

The first step towards selecting the right level of protection should always be to carry out a risk assessment.

Consider the conditions workers will face, including:

  • Wind
  • Moisture
  • Exposure time
  • Air temperature
  • Contact with cold surfaces

The right EN 511:2006 performance levels will depend on the specific task and working environment.

Need help evaluating the use of gloves in your workplace? Book an on-site hand protection audit to help identify the right protection.

COMBINING EN 511:2006 WITH EN 388

Gloves certified to EN 511:2006 also need to meet minimum abrasion and tear resistance requirements under EN 388.

EN 388 is the European standard used to assess protective gloves against mechanical risks, including abrasion, cuts, tears, punctures, and impact.

Cold protection gloves must achieve:

  • Level 1 or above for tear resistance
  • Level 1 or above for abrasion resistance

To achieve Level 2 or higher for convective or contact cold, gloves must also achieve Level 2 for abrasion and tear resistance.

Otherwise, the maximum cold performance level that can be reported is Level 1.

You can learn more about the EN 388 standard in our dedicated guide.

HOW TO CHOOSE THE BEST GLOVES FOR COLD WEATHER OR FREEZER WORK

Choosing the best gloves for cold weather or freezer work should start with a risk assessment.

Once you have a clear picture of the risks involved, you can match the glove to the hazard.

However, protection isn’t the only factor to consider. Here’s what else you’ll need to think about:

  • Fit - poorly fitting gloves can make it harder for workers to carry out tasks safely
  • Dexterity - bulky or inflexible gloves can make fiddly or precise tasks more difficult
  • Grip - choose gloves that will allow workers to safely grip tools, equipment, or other materials
  • Comfort - comfortable gloves can encourage consistent wear and help support correct PPE use
  • Breathability - gloves that allow heat and moisture to escape can be more comfortable, especially for active work over long shifts

Need help selecting the right glove? Our team of sector experts can recommend products that could be a good fit for your team. Just get in touch!

FORTDRESS FREEZER GLOVES HUSKY - BLACK/GREY

HOW SMI HELPS

At SMI, we’re more than just a supplier of cold protective gloves.

We act as a supply partner, supporting you throughout the procurement process.

Our support can include:

  • Hand protection audits - on-site audits that evaluate the use of gloves in your workplace
  • Wearer trials - try new hand protection with your workforce in real working conditions before you buy
  • Compliant hand protection range - a wide range of EN 511:2006-certified cold store, freezer, and waterproof thermal work gloves
  • Dedicated account management - a sector expert who understands your business can recommend products suited to your workforce
  • PPE and workwear recycling scheme - dispose of used cold protection gloves sustainably and securely with our fully managed recycling service

Want to learn more about how we can support your team? Get in touch!

FAQs

What are the British standards for safety gloves?

British standards for safety gloves include:

    • BS EN 511:2006 – covers protection against convective cold, contact cold, and water penetration
    • BS EN 407 – covers protective gloves against thermal risks, including contact heat and radiant heat
    • BS EN ISO 10819 – covers vibration transmissibility of gloves designed to reduce hand-arm vibration
    • BS EN ISO 21420 – sets out general requirements for protective gloves, including sizing and dexterity
    • BS EN 388 – covers protection against mechanical hazards, including abrasion, cuts, tears, punctures, and impact
    • BS EN ISO 374 – covers protective gloves against dangerous chemicals and micro-organisms

These British standards adopt relevant European or international standards.

What is the EN standard for cut-resistant gloves?

The EN standard for cut-resistant gloves is EN 388.

This standard also assesses performance against other mechanical risks, like abrasion, tears, punctures, and impact.

Learn more in our guide to EN 388 and cut resistance levels.

Written by Scott Arnot

Scott Arnot is Product Marketing Manager at SMI. Responsible for promoting SMI's extensive range of workplace products and services, he works closely with suppliers and internal teams to ensure customers can access the products, expertise, and support they need to overcome everyday workplace challenges.

Latest Insights

Read the latest industry insights, top tips, and SMI news.